Customizable & Configurable
Change the speed with the stepper motor...
Continue the customization by selecting clamps to fit your specific tubing size. Removing the pump head is also easier than ever before with the added bayonet lever.
Need a pump that can do it all? Our self priming, direct drive, NSF certified Stepper Peristaltic Pumps for food, beverage, and more. Easily adjust pump speeds for any liquid, regardless of viscosity or suspended particulate.
Pump and tube maintenance has never been easier with a tool-free handle for changing tubing and an easy lever for removing or changing the position of the pump head.
Read MoreContinue the customization by selecting clamps to fit your specific tubing size. Removing the pump head is also easier than ever before with the added bayonet lever.
Ramp and decrease pump speeds for a smooth dispense cycle, or simply adapt your speed perfectly for your liquid.
The 647 Stepper Peristaltic offers excellent repeatability for consistent flavoring of food and drinks.
NSF Certified stepper peristaltic pumps are an easy way to ensure your project will pass full machine certifications.
Use the table on the right for flow rates at specific motor speeds
An important variable to consider, in addition to motor speed, is the size of the tube. Tube diameter will impact flow rate, so please note that the figures here were generated with an 8mm ID and 12mm OD.
Ø Hose | 50 RPM | 100 RPM | 200 RPM | 300 RPM | 450 RPM |
---|---|---|---|---|---|
8X12 | 277 ml/min | 546 ml/min | 1105 ml/min | 1707 ml/min | 2620 ml/min |
The connector for the motor controller is a Molex 22035085 (mates with Molex 50375083). Motor power is 10-40VDC, speed control 0-5V. Please see the specification sheet below for pinout details.
Optical sensing is done with an OMRON EE-SX4161-W11 and the connector is 39012060 (mates with Molex 39000046) and is 4.5-16V